An enclosure is only part of storing gas cylinders safely — where you put it matters just as much. Here are the practical basics to get right, alongside our gas cages.
Keep it outdoors and upright
LPG cylinders should be stored outdoors, in a well-ventilated area, standing upright — never indoors, in a basement, or on their side. Ventilation matters because LPG is heavier than air and will pool at ground level if it leaks, rather than dispersing.
Give it distance from doors, windows and drains
As a general rule, keep cylinders away from doors, windows, and any drain or opening at ground level where gas could collect or find its way indoors. Exact required distances vary by cylinder size and local by-law, so check with your municipality or gas supplier for the specific clearance that applies to your installation — this is worth confirming before you install, not after.
Protect it from direct sun and impact
Cylinders left in direct sun heat up, which raises internal pressure. A cover or cage that shades the cylinder while still allowing airflow around it addresses both problems at once — heat protection and physical protection from knocks, without sealing off ventilation.
Why a cage instead of a wall or box
A solid enclosure without ventilation is a safety problem, not a solution — it traps any leaked gas instead of letting it disperse. This is why every Tilt gas cage is a ventilated aluminium enclosure, not a sealed box: it protects the cylinder from weather and knocks while keeping airflow open around it.
Get it checked
If you're unsure whether your setup complies with local requirements, your gas supplier or installer can confirm what's needed for your specific cylinder size and property. It's a quick check that's worth doing before installation.
Browse the full gas cage range, laser-cut and powder-coated in Cape Town.
